ATMOSFAR First Expedition Checklist: Fuel & Field Prep

First Expedition Checklist

Pick up where you left off. Your progress stays saved on this device.

PROGRESS

0/8

An expedition preparation order based on developer blogs. Follow your current build for objectives, controls and recipes.

1. Prepare yourself and your tools

Check your suit and life support

Check the current HUD and in-game tutorial before leaving safety. Follow the build’s prompts for life support and equipment.

Charge your backpack battery

Tools use electricity. The developer describes charging from sunlight, bioluminescent plants and suitable power connections.

Prepare an Extractor and Welder

Use the Extractor for scrap recovery and the Welder for repairs. Check required materials before heading out.

2. Set up your field support

Practice a short jetpack trip

Start close to a safe landing area. The jetpack is intended for short flights; leave room to return.

Connect your Camp Hub

The Utility Wasp supports a portable camp. Use the Camp Hub to distribute power and check connected equipment demand.

3. Prepare your Utility Wasp

Inspect and repair your Wasp

Check damage and repair with a Welder and the materials shown in game. Plan a nearby destination first.

Prepare liquid hydrogen fuel

Hydrogen crystals are refined into liquid hydrogen. Check refinery power, fuel reserves and your return route.

Check your return and resupply plan

Before takeoff, check fuel, tool charge and repair supplies. Keep your camp or established airbase within your expedition plan.

Low on fuel or power? Open the resupply guide

Saved on this device · shared across languages

Use this checklist to prepare for an expedition, rather than as a timed prologue walkthrough. Prepare yourself, establish field support, then check your Wasp. Mark, save and share tasks in the interactive checklist above.

Eight departure checks

1. Prepare yourself and your tools

Check your suit and life support：Check the current HUD and in-game tutorial before leaving safety. Follow the build’s prompts for life support and equipment.
Charge your backpack battery：Tools use electricity. The developer describes charging from sunlight, bioluminescent plants and suitable power connections.
Prepare an Extractor and Welder：Use the Extractor for scrap recovery and the Welder for repairs. Check required materials before heading out.

2. Set up your field support

Practice a short jetpack trip：Start close to a safe landing area. The jetpack is intended for short flights; leave room to return.
Connect your Camp Hub：The Utility Wasp supports a portable camp. Use the Camp Hub to distribute power and check connected equipment demand.

3. Prepare your Utility Wasp

Inspect and repair your Wasp：Check damage and repair with a Welder and the materials shown in game. Plan a nearby destination first.
Prepare liquid hydrogen fuel：Hydrogen crystals are refined into liquid hydrogen. Check refinery power, fuel reserves and your return route.
Check your return and resupply plan：Before takeoff, check fuel, tool charge and repair supplies. Keep your camp or established airbase within your expedition plan.

Your previous progress

The revised checklist has its own save. Previous completion remains preserved and its count is shown; different tasks are not migrated by their old position. Reset affects only revised progress. Importing a current share link adds completion without clearing your existing tasks.

Next steps

Sources

These development-era descriptions explain the systems; individual details may change in the release build.